In situ formation of bimetallic FeNi nanoparticles on sand through green technology: Application for tetracycline removal

• In situ preparation of FeNi nanoparticles on the sand via green synthesis approach. • Removal of tetracycline using GS-FeNi in batch and column study. • Both reductive degradation and sorption played crucial role the process. • Reusability of GS-FeNi showed about 77.39±4.3% removal on 4th cycle. • TC by-products after interaction showed less toxic as compared with TC. In this study, FeNi nanoparticles were green synthesized using Punica granatum (pomegranate) peel extract, and these nanoparticles were also formed in situ over quartz sand (GS-FeNi) for removal of tetracycline (TC). Under the optimized operating conditions, (GS-FeNi concentration: 1.5% w/v; concentration of TC: 20 mg/L; interaction period: 180 min), 99±0.2% TC removal was achieved in the batch reactor. The removal capacity was 181±1 mg/g. A detailed characterization of the sorbent and the solution before and after the interaction revealed that the removal mechanism(s) involved both the sorption and degradation of TC. The reusability of reactant was assessed for four cycles of operation, and 77±4% of TC removal was obtained in the cycle. To judge the environmental sustainability of the process, residual toxicity assay of the interacted TC solution was performed with indicator bacteria (Bacillus and Pseudomonas) and algae (Chlorella sp.), which confirmed a substantial decrease in the toxicity. The continuous column studies were undertaken in the packed bed reactors using GS-FeNi. Employing the optimized conditions, quite high removal efficiency (978±5 mg/g) was obtained in the columns. The application of GS-FeNi for antibiotic removal was further evaluated in lake water, tap water, and ground water spiked with TC, and the removal capacity achieved was found to be 781±5, 712±5, and 687±3 mg/g, respectively. This work can pave the way for treatment of antibiotics and other pollutants in the reactors using novel green composites prepared from fruit wastes.     

过一硫酸盐的活化及其降解水中有机污染物机理的研究进展

基于活化过一硫酸盐（PMS）产生SO₄^-·的新型高级氧化技术,在芬顿和类芬顿催化降解水中有机污染物的研究中占有重要地位。本文从活化PMS方法的特点和用途出发,对目前活化PMS的主要方法进行了论述,并对活化PMS降解水中有机污染物的机理进行了探讨,最后对该领域研究中存在的问题进行了分析。指出,开发高效的协同活化PMS的方法将成为该领域研究的必然趋势。     

Abundance and removal of antibiotic resistance genes (ARGs) in the rearing environments of intensive shrimp aquaculture in South China

Although research regarding antibiotic resistance genes (ARGs) in aquaculture environments has gained increasing scientific interest, further studies are required to understand the abundances and removal mechanisms of ARGs during the entire rearing period of shrimp aquaculture. Thus, in this study, abundances, distributions and removal rates of ARGs in different environmental compartments of intensive shrimp farms in South China were investigated during the entire rearing period. The results indicated that sul1 and cmlA were the predominant ARGs in the water and sediment samples. Additionally, the total abundance of ARGs was higher in shrimp pond water than in the source water and farm effluent. Moreover, sediment samples indicated significantly higher ARG abundances than water samples from the shrimp ponds (P?<?0.05). Environmental factors were found to significantly affect the distribution of ARGs in shrimp rearing environments. Furthermore, stable ponds aided the removal of ARGs from shrimp pond water. This study accounted for temporal variations in ARG abundances as well as removal of ARGs in different environmental compartments during the entire shrimp rearing period. However, additional research is required to optimize the water treatment process for removal of ARGs from the aquaculture.     

发酵液作为EBPR碳源的动力学模拟

发酵液是一种优质的碳源,能够提高生物除磷系统(EBPR)的除磷效果.采用基于碳源代谢的修正ASM2模型,能够较好地模拟发酵液作为EBPR碳源的动力学变化规律.发酵液作为EBPR唯一碳源时,系统中的异养菌不仅不对聚磷菌(PAO)的生长构成竞争关系,反而促进PAO的生长.发酵液作为实际污水的补充碳源时,优化了污水中的碳源组成,创造了有利于聚磷菌生长的环境,使EBPR中聚磷菌达到微生物总量的40%以上,比实际污水作为碳源的EBPR中的PAO含量提高了3.3倍.     

锌离子对厌氧氨氧化脱氮效能的影响

通过序批实验的方法,直接接种厌氧氨氧污泥,研究了Zn2＋对厌氧氨氧化（Anammox）脱氮效能的影响。研究结果表明,当进水Zn2＋质量浓度小于2 mg/L时,对厌氧氨氧化生物活性有促进作用,可增强微生物的脱氮效能;当进水Zn2＋质量浓度在2 mg/L和4 mg/L之间时,脱氮效能无明显变化,说明对厌氧氨氧化微生物活性无明显影响;当进水Zn2＋质量浓度大于4 mg/L,对厌氧氨氧化反应有抑制作用,Zn2＋浓度越高,抑制作用越明显。 Zn2＋对厌氧氨氧化的半抑制质量浓度（CI,50）为32.3 mg/L,NO2--N与NH4＋-N转化比的平均值为1.28。     

Fenton试剂氧化法处理印染废水实验研究

通过将Fenton法应用于印染废水的处理,研究pH值、温度、反应时间、Fe2+投加量以及H2O2投加量对Fenton试剂处理印染废水的影响,同时确定Fenton法处理印染废水的最适反应条件。实验结果表明:(1)最适反应条件,即pH值、温度、反应时间、Fe2+投加量、H2O2投加量分别为3,50℃,45 min,70 mg/L,2.5 mL/L,此时COD的去除率最高,为66.60%。(2)pH值为3时,下列因素对COD的去除率影响程度大小依次为H2O2投加量Fe2+投加量反应时间反应温度。     

SBR法处理低C/N污水的工程应用——以某基地污水处理站改造工程为例

低C/N污水的生化处理过程中,由于碳源不足,不能满足硝化和反硝化的要求,造成出水NH3-N超标。采用SBR工艺对某基地污水处理站厌氧处理后的低C/N污水进行改造,处理后出水COD去除率达到97%以上,NH3-N去除率达到93%以上。     

北京市生活垃圾焚烧厂耗能排污特征及节能减排潜力

将生活垃圾焚烧厂从整体到局部分为场站-工艺-单元三个层次,通过现场调查,获取了北京市生活垃圾焚烧设施在2009~2011年不同层次耗能排污数据。分析表明,在焚烧工艺中焚烧单元处理单位垃圾的电耗达到60.83 kW·h,余热发电单元水耗最大,尾气处理单元的电耗和水耗相对较小。不同场站在处理单位垃圾时烟气和炉渣产量比较接近,但飞灰排放差异较大,在2.92~24.78 kg/t垃圾之间。渗沥液水量年际变化较大,水质相对稳定,MBR单元对污染物的去除效果最好,但其耗电量较大,占渗沥液处理工艺总耗电量的87.55%。焚烧工艺发电最优值为423.77 kW·h/t垃圾,产生的电能除满足自身需求外,还剩余1.8×108 kW·h的电能,可用于渗沥液处理工艺或输向场站外部。每吨渗沥液处理最多可产生中水0.962 t,全北京市每年产生中水196456 t/a,使用潜力大。     

机动车排气检验机构的环境影响评价研究

机动车排气定期检验机构对周边环境质量的影响虽然不大,但由于大多处在闹市区,贴近敏感人群,其噪声与机动车尾气对市民的影响却不容忽视。通过环境影响评价,分析机动车排气定期检验机构的环境影响特点,并结合机动车排气定期检验业务流程,对机动车排气定期检验机构的整体规划与布局提出合理建议,对噪声与大气污染物排放提出有效控制措施,不仅可以有效控制机动车排气定期检验机构对周边大气环境质量的影响,也能有效减小噪声对周边市民日常生活的影响。     

明矾石在水体微藻去除中的应用研究

以温州市某大学校区内富营养化水体为研究对象,采用本地明矾石对含藻水体进行混凝除藻、除浊实验研究,分别进行投加量、搅拌强度、搅拌时间、静置时间及pH值对微藻去除效率的影响研究,以获得处理工艺的最佳条件,为恢复河流水体生态自净功能提供理论基础.试验中对投加明矾石前后,水体中浊度、总磷、氨氮和总氮进行了测定,结果表明：明矾石最佳投加量为0.35 g/L,最佳搅拌方式为200 rpm搅拌4 min;最佳静置时间为25 min;在碱性或中性水体的处理效果尤佳.